use open qw( :std :utf8 );
use experimental qw( lexical_subs );
-our $VERSION = '1.05';
+our $VERSION = '1.06';
use Getopt::Long '2.33', qw( :config gnu_getopt );
-sub podexit {
- require Pod::Usage;
- Pod::Usage::pod2usage(-exitval => 0, -perldocopt => '-oman', @_);
-}
my %opt;
GetOptions(\%opt,
'color|c!',
'value-length=i',
'hidemin=i',
'hidemax=i',
- 'limit|L=s' => sub {
+ 'minval=f',
+ 'maxval=f',
+ 'limit|L:s' => sub {
my ($optname, $optval) = @_;
$optval ||= 0;
($opt{hidemin}, $opt{hidemax}) =
" (range expected)\n"
);
},
+ 'header!',
'markers|m=s',
+ 'graph-format=s' => sub {
+ $opt{'graph-format'} = substr $_[1], 0, 1;
+ },
'spark:s' => sub {
- $opt{spark} = [split //, $_[1] || '⎽▁▂▃▄▅▆▇█'];
+ $opt{spark} = [split //, $_[1] || ' ▁▂▃▄▅▆▇█'];
+ },
+ 'palette=s' => sub {
+ $opt{palette} = {
+ fire => [qw( 90 31 91 33 93 97 96 )],
+ fire88 => [map {"38;5;$_"} qw(
+ 80 32 48 64 68 72 76 77 78 79 47
+ )],
+ fire256=> [map {"38;5;$_"} qw(
+ 235 52 88 124 160 196
+ 202 208 214 220 226 227 228 229 230 231 159
+ )],
+ ramp88 => [map {"38;5;$_"} qw(
+ 64 65 66 67 51 35 39 23 22 26 25 28
+ )],
+ whites => [qw( 1;30 0;37 1;37 )],
+ greys => [map {"38;5;$_"} 52, 235..255, 47],
+ }->{$_[1]} // [ split /[^0-9;]/, $_[1] ];
},
'stat|s!',
+ 'signal-stat=s',
'unmodified|u!',
'width|w=i',
+ 'version' => sub {
+ say "barcat version $VERSION";
+ exit;
+ },
'usage|h' => sub {
local $/;
my $pod = readline *DATA;
print $contents;
exit;
},
- 'help' => sub { podexit(-verbose => 2) },
+ 'help|?' => sub {
+ require Pod::Usage;
+ Pod::Usage::pod2usage(
+ -exitval => 0, -perldocopt => '-oman', -verbose => 2,
+ );
+ },
) or exit 64; # EX_USAGE
-$opt{width} ||= $ENV{COLUMNS} || 80;
+$opt{width} ||= $ENV{COLUMNS} || qx(tput cols) || 80;
$opt{color} //= -t *STDOUT; # enable on tty
+$opt{'graph-format'} //= '-';
$opt{trim} *= $opt{width} / 100 if $opt{trimpct};
$opt{units} = [split //, ' kMGTPEZYyzafpnμm'] if $opt{'human-readable'};
$opt{anchor} //= qr/\A/;
$opt{'value-length'} = 6 if $opt{units};
$opt{'value-length'} = 1 if $opt{unmodified};
+$opt{'signal-stat'} //= exists $SIG{INFO} ? 'INFO' : 'QUIT';
+$opt{markers} //= '=avg >31.73v <68.27v +50v |0';
+$opt{palette} //= $opt{color} && [31, 90, 32];
my (@lines, @values, @order);
+$SIG{$_} = \&show_stat for $opt{'signal-stat'} || ();
+$SIG{ALRM} = sub {
+ show_lines();
+ alarm $opt{interval} if defined $opt{interval} and $opt{interval} > 0;
+};
+$SIG{INT} = \&show_exit;
+
if (defined $opt{interval}) {
$opt{interval} ||= 1;
- $SIG{ALRM} = sub {
- show_lines();
- alarm $opt{interval};
- };
- alarm $opt{interval};
+ alarm $opt{interval} if $opt{interval} > 0;
eval {
require Tie::Array::Sorted;
} or warn $@, "Expect slowdown with large datasets!\n";
}
-$SIG{INT} = sub {
- $SIG{INT} = 'DEFAULT'; # reset for subsequent attempts
- 'IGNORE' # continue after assumed eof
-};
-
my $valmatch = qr/$opt{anchor} ( \h* -? [0-9]* \.? [0-9]+ (?: e[+-]?[0-9]+ )? |)/x;
while (readline) {
s/\r?\n\z//;
my $trimpos = abs $opt{trim};
$trimpos -= length $1 if $opt{unmodified};
if ($trimpos <= 1) {
- $_ = substr $_, 0, 1;
+ $_ = substr $_, 0, 2;
}
elsif (length > $trimpos) {
substr($_, $trimpos - 1) = '…';
}
}
push @lines, $_;
+ show_lines() if defined $opt{interval} and $opt{interval} < 0
+ and $. % $opt{interval} == 0;
}
$SIG{INT} = 'DEFAULT';
@lines > $nr or return unless $opt{hidemin};
@order = sort { $b <=> $a } @order unless tied @order;
-my $maxval = ($opt{hidemax} ? max grep { length } @values[0 .. $opt{hidemax} - 1] : $order[0]) // 0;
-my $minval = min $order[-1] // (), 0;
+my $maxval = $opt{maxval} // ($opt{hidemax} ? max grep { length } @values[0 .. $opt{hidemax} - 1] : $order[0]) // 0;
+my $minval = $opt{minval} // min $order[-1] // (), 0;
my $lenval = $opt{'value-length'} // max map { length } @order;
my $len = defined $opt{trim} && $opt{trim} <= 0 ? -$opt{trim} + 1 :
max map { length $values[$_] && length $lines[$_] }
($opt{width} - $lenval - $len) / ($maxval - $minval); # bar multiplication
my @barmark;
-if ($opt{markers} // 1 and $size > 0) {
- my sub orderpos { (($order[$_[0]] + $order[$_[0] + .5]) / 2 - $minval) * $size }
- $barmark[ (sum(@order) / @order - $minval) * $size ] = '='; # average
- $barmark[ orderpos($#order * .31731) ] = '>';
- $barmark[ orderpos($#order * .68269) ] = '<';
- $barmark[ orderpos($#order / 2) ] = '+'; # mean
- $barmark[ -$minval * $size ] = '|' if $minval < 0; # zero
- color(36) for @barmark;
+if ($opt{markers} and $size > 0) {
+ for my $markspec (split /\h/, $opt{markers}) {
+ my ($char, $func) = split //, $markspec, 2;
+ my $pos = eval {
+ if ($func eq 'avg') {
+ return sum(@order) / @order;
+ }
+ elsif ($func =~ /\A([0-9.]+)v\z/) {
+ my $index = $#order * $1 / 100;
+ return ($order[$index] + $order[$index + .5]) / 2;
+ }
+ else {
+ return $func;
+ }
+ } - $minval;
+ $pos >= 0 or next;
+ color(36) for $barmark[$pos * $size] = $char;
+ }
state $lastmax = $maxval;
if ($maxval > $lastmax) {
);
}
+say(
+ color(31), sprintf('%*s', $lenval, $minval),
+ color(90), '-', color(36), '+',
+ color(32), sprintf('%*s', $size * ($maxval - $minval) - 3, $maxval),
+ color(90), '-', color(36), '+',
+ color(0),
+) if $opt{header};
+
while ($nr <= $#lines) {
$nr >= $opt{hidemax} and last if defined $opt{hidemax};
my $val = $values[$nr];
+ my $rel = length $val && ($val - $minval) / ($maxval - $minval);
+ my $color = !length $val || !$opt{palette} ? undef :
+ $val == $order[0] ? $opt{palette}->[-1] : # max
+ $val == $order[-1] ? $opt{palette}->[0] : # min
+ $opt{palette}->[ $rel * ($#{$opt{palette}} - 1) + 1 ];
if ($opt{spark}) {
- print $opt{spark}->[ ($val - $minval) / $maxval * $#{$opt{spark}} ];
+ print color($color), $opt{spark}->[
+ !$val ? 0 : # blank
+ $val == $order[0] ? -1 : # max
+ $val == $order[-1] ? 1 : # min
+ $#{$opt{spark}} < 3 ? 1 :
+ $rel * ($#{$opt{spark}} - 3) + 2.5
+ ];
next;
}
if (length $val) {
- my $color = !$opt{color} ? undef :
- $val == $order[0] ? 32 : # max
- $val == $order[-1] ? 31 : # min
- 90;
$val = $opt{units} ? sival($val) : sprintf "%*s", $lenval, $val;
color($color) for $val;
}
my $line = $lines[$nr] =~ s/\n/$val/r;
printf '%-*s', $len + length($val), $line;
- print $barmark[$_] // '-' for 1 .. $size && (($values[$nr] || 0) - $minval) * $size + .5;
+ print $barmark[$_] // $opt{'graph-format'} for 1 .. $size && (($values[$nr] || 0) - $minval) * $size + .5;
say '';
}
continue {
$nr++;
}
-say '' if $opt{spark};
+say $opt{palette} ? color(0) : '' if $opt{spark};
}
-show_lines();
-if ($opt{stat}) {
+sub show_stat {
if ($opt{hidemin} or $opt{hidemax}) {
$opt{hidemin} ||= 1;
$opt{hidemax} ||= @lines;
}
if (@order) {
my $total = sum @order;
- printf '%s total', $total;
+ printf '%s total', color(1) . $total . color(0);
printf ' in %d values', scalar @values;
- printf ' (%s min, %*.*f avg, %s max)',
- $order[-1], 0, 2, $total / @order, $order[0];
+ printf(' (%s min, %s avg, %s max)',
+ color(31) . $order[-1] . color(0),
+ color(36) . (sprintf '%*.*f', 0, 2, $total / @order) . color(0),
+ color(32) . $order[0] . color(0),
+ );
}
say '';
}
+sub show_exit {
+ show_lines();
+ show_stat() if $opt{stat};
+ exit 130 if @_; # 0x80+signo
+ exit;
+}
+
+show_exit();
+
__END__
=encoding utf8
Contents are concatenated similar to I<cat>,
but numbers are reformatted and a bar graph is appended to each line.
+Don't worry, barcat does not drink and divide.
+It can has various options for input and output (re)formatting,
+but remains limited to one-dimensional charts.
+For more complex graphing needs
+you'll need a larger animal like I<gnuplot>.
+
=head1 OPTIONS
=over
or capture the numbers itself,
for example I<-f'(\d+)'> for the first digits anywhere.
+=item --header
+
+Prepend a chart axis with minimum and maximum values labeled.
+
=item -H, --human-readable
Format values using SI unit prefixes,
Also changes an exponent I<1.602176634e-19> to I<160.2z>.
Short integers are aligned but kept without decimal point.
-=item -t, --interval[=<seconds>]
+=item -t, --interval[=(<seconds>|-<lines>)]
-Interval time to output partial progress.
+Output partial progress every given number of seconds or input lines.
+An update can also be forced by sending a I<SIGALRM> alarm signal.
=item -l, --length=[-]<size>[%]
Prepend a dash (i.e. make negative) to enforce padding
regardless of encountered contents.
-=item -L, --limit=(<count>|<start>-[<end>])
+=item -L, --limit[=(<count> | <start>-[<end>])]
Stop output after a number of lines.
All input is still counted and analyzed for statistics,
but disregarded for padding and bar size.
-=item -m, --markers=
+=item --graph-format=<character>
-Statistical positions to indicate on bars.
-Cannot be customized yet,
-only disabled by providing an empty argument.
+Glyph to repeat for the graph line.
+Defaults to a dash C<->.
-Any value enables all marker characters:
+=item -m, --markers=<format>
+
+Statistical positions to indicate on bars.
+A single indicator glyph precedes each position:
=over 2
-=item B<=>
+=item <number>
-Average:
-the sum of all values divided by the number of counted lines.
+Exact value to match on the axis.
+A vertical bar at the zero crossing is displayed by I<|0>
+for negative values.
+For example I<:3.14> would show a colon at pi.
-=item B<+>
+=item <percentage>I<v>
-Mean, median:
+Ranked value at the given percentile.
+The default shows I<+> at I<50v> for the mean or median;
the middle value or average between middle values.
+One standard deviation right of the mean is at about I<68.3v>.
+The default includes I<< >31.73v <68.27v >>
+to encompass all I<normal> results, or 68% of all entries, by B<< <--> >>.
-=item B<<>
+=item I<avg>
-Standard deviation left of the mean.
-Only 16% of all values are lower.
+Matches the average;
+the sum of all values divided by the number of counted lines.
+Indicated by default as I<=>.
-=item B<< > >>
+=back
-Standard deviation right of the mean.
-The part between B<< <--> >> encompass all I<normal> results,
-or 68% of all entries.
+=item --min=<number>, --max=<number>
-=back
+Bars extend from 0 or the minimum value if lower,
+to the largest value encountered.
+These options can be set to customize this range.
+
+=item --palette=(<preset> | <color>...)
+
+Override colors of parsed numbers.
+Can be any CSI escape, such as I<90> for default dark grey,
+or alternatively I<1;30> for bold black.
+
+In case of additional colors,
+the last is used for values equal to the maximum, the first for minima.
+If unspecified, these are green and red respectively (I<31 90 32>).
+
+=item --spark[=<glyphs>]
+
+Replace lines by I<sparklines>,
+single characters corresponding to input values.
+A specified sequence of unicode characters will be used for
+Of a specified sequence of unicode characters,
+the first one will be used for non-values,
+the last one for the maximum,
+the second (if any) for the minimum,
+and any remaining will be distributed over the range of values.
+Unspecified, block fill glyphs U+2581-2588 will be used.
=item -s, --stat
Override the maximum number of columns to use.
Appended graphics will extend to fill up the entire screen.
+=item -h, --usage
+
+Overview of available options.
+
+=item --help
+
+Full documentation
+rendered by perldoc.
+
+=item --version
+
+Version information.
+
=back
=head1 EXAMPLES
git.shiar.nl / barcat.git / blobdiff